Learn about the independent entry and exit of the valve lathe system
Date of release:2018-08-13 Author:Tiansheng Click:
In addition to the tailstock type, the valve lathe also has the top function. The standard type and the economic type have the tool holder II as the top function. When the tool holder II is closed for the top function, the tool holder II and the tool holder I have similar functions, and have punching, outer circle (vehicle step), tapping, and car taper. Conventional functions such as slotting, inner hook groove, and flat chamfering.
In the old version of the system, when the tool holder II is opened as a top in the normal situation, the tool holder II will immediately hold the part after the chuck is tightened, and then enter the other tool holder. After the tool holder is finished, the tool holder II The tip is automatically retracted, and finally the collet release part is automatically taken out of the machine.
The valve lathe and the new version system can perform the other functions such as center hole, punching, flat head or chamfering before the part of the tool holder II is placed. The tool holder II then enters to hold the part and continue to process the outer circle. , slotting, chamfering, etc., then the top exit, the end face or hole is machined again, and finally the collet release part is automatically taken out of the machine.
The address of this article:http://www.menportals.com/en/news/378.html
The next one:Safety precautions for using valve lathes
- Safety precautions for using valve lathes
- Talk about the special equipment for the valve starting and starting the valve
- Main features of welding of rod end drilling machine for valve equipment
- Tell me more about how the valve lathe controls the operation.
- How to make the industry of valve lathe processing rise
- The steps and methods of valve machine fault handling are nothing more than
- So how should the principle and function of the valve device be understood?
- What adjusts the clearance of the valve lathe?
- Tiansheng Xiaobian explains to you the classification of engine variable valve equipment intake
- What are the advantages of an automatic valve lathe as a guide feed thrust?